Build for in Contest Setup sets the contest groups a build covers. A build for chosen groups plans, simulates, fills, and keeps Live Sync on its own contests only. The other contests of the slate stay with the other builds. With a Cash build and a 150-max build, each group gets its own settings, its own Selection, and its own exposure caps. See What are contest groups.
Both plans. Build for is part of Contest Setup on Essential and Power.
Before you start
- Upload the entries file of the slate. See Upload your entries.
- Run a build. Contest Setup and Build for show on a build that holds lineups. See Your first build.
Make a build for one group
- Open the slate and run a build. Your first build covers every contest.
- Open the LINEUPS rail. On the Entries Preview tab, click the gear at the far right of the controls row to open Contest Setup.
- Find Build for at the top right of Contest Setup. On a phone it leads the top row of the sheet. It reads All contests.
- Click it. The menu lists All contests at the top, then one row for each group you entered, with its contests and entries, for example Cash · 2 contests · 4 entries. A check marks each group this build covers.
- Click New build for Cash. A new build tab opens for Cash and becomes the active build. The build you came from gives Cash up, and its Build for reads All other contests. A message names the move and offers Undo.
- Set up the new build for its contests. Click Build in the toolbar, then Build in the footer of the Settings sheet. A new build has no lineups until you build it.
- Press Fill N on each build. Each build fills its own contests only.
The New build for rows show while the build covers two or more groups, one row for each group it covers.
Every control of the Build for menu
| Control | What it does | Default |
|---|---|---|
| Build for button | Shows the groups the build covers: All contests, All other contests, a list such as Cash, 20-max, or No contests. A spinner shows while the slate's contests load. | All contests |
| All contests / All other contests | The top row, with the note New contests join too. It reads All other contests while another build of the slate keeps a group. Click it to give this build every contest that no other build keeps. No other build changes. It shows a check only while the build covers exactly that. | Checked on a new build |
| Group row | One row for each group you entered, with its contests, its entries, and the other builds that cover it. Click a checked row to give the group up: no other build takes it. Click a row with no check to take the group: every other build of the slate gives it up. The menu stays open, so you can click more rows. | Every row checked on a new build |
| New build for a group | Opens a new build for that one group. The build you are on gives the group up. | Shown while the build covers two or more groups |
Two kinds of build
- A build for all other contests takes every contest that no other build keeps. A contest from a later upload joins it when no other build keeps its group.
- A build for chosen groups keeps its list. It never takes a group by itself, also when its list holds every group you entered.
A build changes its kind only when you change it: click the top row to make a build for all other contests, or give it a list with New build for a group.
Undo a move
When a click takes a group from another build, and after every New build for a group, a message names the move, for example 150-max moved to Cash build from 150-max build. It stays 10 seconds. Click Undo to put each build back as it was. Undo also removes the new build of New build for a group while that build is still empty. When you are still on the new build, Undo opens the build you came from.
When you changed a build after the move, built the new build, or deleted a build that gave a group up, Undo changes nothing and reads Undo did nothing. A build changed after the move. Use the Build for menu to set each build again.
A click that takes a group no other build covers changes one build only, so it shows no message.
The tag on the build tab
A build for chosen groups shows its groups after its name, for example Cash build · Cash. The tag shows wherever a build is listed by name: the build tab, the phone build chip, the Builds sheet of Manage builds, the build pickers of a combined build, and the command palette, where a search for "cash" finds the Cash build. A build for all contests or for all other contests shows its name alone. Point at any tab with groups to read Build for: and its groups in the tooltip. See Saved builds and tabs.
The Entries Preview of a build for groups
- The Entries Preview tab lists the contests of this build only.
- A line under the controls names the contests outside this build, and the build of this device that covers each group, for example 4 contests are outside this build · Single entry, 20-max: 7:42 PM · 150-max: 150-max build. Click a build's name to open that build.
- no build in amber means that no build on this device covers those contests.
- In Contest Setup, the first row of the table reads This build's contests when the build leaves contests out. Its Fill column holds one switch for every contest of the build, with a count such as 3/4 while some are off. Build for takes the place of the old quick picks, GPP contests only and Cash contests only.
- A build that covers none of your entered contests shows This build fills none of your entered contests. in Contest Setup. Its Entries Preview lists the build's own lineups, as on a slate with no entries file.
Exposure caps of a build for chosen groups
The Entries Preview caps of a build count the entries of that build's contests only: Blanket Max Exposure, the By position caps, Max Lev, and each player's Min Exp and Max Exp after a build.
A build for chosen groups keeps its own caps. When the build gets its list, it takes a copy of the slate's caps at that moment, and a later change stays on that build. The caps save with the build, so they follow it to your other devices. A fill from this build keeps them, in the app and from a connected AI agent. A cloud build in parts uses the settings of each part's playbook instead. Every build for all contests or for all other contests shares one set of caps, as before. The Blanket Max Exposure popover of a build with its own caps reads This build keeps its own caps. Builds for all other contests share one set. When the build goes back to All other contests, its own caps go and it reads the shared set. See Player exposure after a build.
Fill and Live Sync
- Fill writes this build's preview into the entries of this build's contests, for the contests switched on. It never writes a contest outside the build.
- After a Fill, Live Sync of each build writes its own contests only. A Cash build and a 150-max build can each stay synced on the same device.
- A lineup you set as an entry in a contest outside the build stays saved. It does not fill from this build. See Set a lineup as an entry.
- A contest that no build covers gets no Fill and no Live Sync write. Its saved entries keep the lineups they hold. To cover it, check its group in the Build for menu of a build, or click All other contests on the build for the rest.
How it works
DFS Hero reads each contest's group from the slate's contest list, which loads after the page. Until the list loads, a build for groups shows Loading this build's contests... in Entries Preview and writes nothing. A build for all contests does not wait.
The new build of New build for a group starts with the settings of the build you made it from, as + does. When the slate already holds another empty build tab that was never built and holds no groups of its own, DFS Hero uses that tab, with its own settings.
A build keeps its groups on your account, so the tabs show the same groups on every device. A rebuild keeps the groups of the build it replaces.
Tips
- Rename each build after its group, for example Cash build and 150-max build. The tag and the outside line then read at a glance.
- Set each build for the contests it fills. A cash build can rank by Projection. A 150-max build can use Win Paths after a sim.
- After a new upload, read the outside line. no build means a new group has no build yet.
- To fill two contests of one group from two builds, keep both builds on All contests and use the Fill switches. See Contest Setup and Fill.
Troubleshooting
"This build fills none of your entered contests." : the build's groups hold none of your contests. Open Build for and check a group, or click the top row.
"no build" in the line under the controls : no build covers those contests. Check their group in a build's Build for menu.
"Loading this build's contests..." : the slate's contest list is still on its way. Wait a moment.
The Build for button shows a retry icon : the slate's contests did not load. Its tooltip reads This slate's contests did not load. Click to retry. Click it.
"Entries Preview did not load." with Retry on a build for groups : the slate's contests did not load, so the build cannot tell which entries are its own. Click Retry to ask for the contests again. A build for all contests never waits for them.
"Undo did nothing. A build changed after the move." : a build changed after the move. Set each build again in Build for.
Related articles
Was this article helpful?